← All projects
Workshop / Storage
Rolling Lumber and Plywood Cart
A compact shop cart that keeps plywood and partial sheets standing on edge in a center slot, offcuts in two open bins with a front lip, and long boards in a cubby under the deck.
Get to know the build.
14 steps with drawings. Materials: lumber, plywood, casters and screws.
- Finished size · width × depth × height
- 48 × 28 × 38-1/2 in
- Stock used in the design
- 2x4 SPF, 8 ft; 3/4 in plywood, 4 × 8 ft; Everbilt 3 in gray cast-iron swivel plate caster; #8 x 1-5/8 in tan star flat-head deck screws; #9 x 2-1/2 in tan star flat-head deck screws; Kreg #8 x 1-1/4 in coarse Blue-Kote pocket-hole screws; and more in the shopping list
- Tools to check
- Tape measure, Speed square, Pencil, Miter saw, Circular saw, Straightedge cutting guide, Drill/driver, Drill bits (1/8 in and 5/32 in for pilot holes), T20 and T25 star driver bits and #2 square driver bit, Pocket-hole jig (Kreg), Lag-screw pilot bit (5/32 in) and clearance bit (1/4 in), Socket or nut driver (7/16 in), Hammer, Clamps (at least 2, bar clamps 12 in or longer), Safety glasses, Hearing protection and Scrap block of wood.
A project to look forward to.
We’re developing this digital build plan. Explore the design now; this page will link to its Etsy listing when it’s available.
Follow our Etsy shop ↗Read before you build ↗