← All projects
Home / Furniture
Entryway Boot Bench
A sturdy slatted bench for the front door, built from four 2x4 studs and one 2x2 with square cuts, screws and glue.
Get to know the build.
6 steps with drawings. Materials: lumber and screws.
- Finished size · width × depth × height
- 38 × 15-1/2 × 18 in
- Stock used in the design
- 2x2 SPF, 8 ft; 2x4 SPF, 8 ft; #8 x 2-1/2 in interior flat-head Torx wood screws; Titebond III Ultimate wood glue; DAP Plastic Wood natural latex wood filler; 3M Pro Grade Precision 9x11 in 120-grit medium sheets; and more in the shopping list
- Tools to check
- Tape measure, Speed square, Pencil, Miter saw, Drill/driver, Drill bits (1/8 in and 5/32 in for pilot holes), T20 star driver bit, Clamps (at least 4, two of them bar clamps 36 in or longer), Small paintbrush, Safety glasses and Hearing protection.
A project to look forward to.
We’re developing this digital build plan. Explore the design now; this page will link to its Etsy listing when it’s available.
Follow our Etsy shop ↗Read before you build ↗